WHAT DAMAGES WOOD?

HOME BLOG WHAT DAMAGES WOOD?
WHAT DAMAGES WOOD?

Wood is one of the oldest construction materials. It is easy to work, lightweight and strong, with excellent sound, thermal and electrical insulation properties. Yet, as a biological material, it can deteriorate under external influences. Various protective treatments help it resist those effects.

This section discusses the principal causes of deterioration and ways to prevent them. Wood has many biological enemies: fungi, bacteria, insects and termites. Some can destroy it completely, while others affect only its appearance. Is biodegradability necessarily a disadvantage? Imagine if trees growing in forests never decomposed.

Wood is a biodegradable material that does not leave permanent waste. The text describes design and technology as ways to make it last indefinitely when desired, while also allowing it to be burned or left to decay. Here, our focus is timber used in buildings and the measures that protect it from damaging agents.

The first step is to select timber appropriate to its intended environment and use suitable construction details. Species, natural durability, moisture content and exposure conditions should be considered together. An interior door and a garden element exposed to rain, sunlight and soil do not need the same protection.

Moisture and water

Wood gains or loses water according to ambient humidity, causing swelling and shrinkage. Repeated changes may eventually cause cracks, open joints and deterioration of surface finishes. Protection therefore goes beyond paint or varnish. Slopes that shed rainwater, joints that avoid trapped water and adequate ventilation are fundamental to durability. Exterior timber in particular should not remain continuously wet.

Fungi and insects

Not every colour change means that timber has lost its load-bearing capacity. Some fungi cause surface mould or staining, while decay fungi damage the wood structure and can reduce its strength. Areas that remain damp and poorly ventilated need careful monitoring.

Some insects tunnel through the wood. Small holes and fresh wood dust are signs requiring investigation. If structural members are affected, specialists should assess the extent of damage.

Sunlight and weather

Sunlight, rain and temperature changes can alter the surface appearance over time. Unprotected exterior wood may turn grey, become rough or develop fine cracks. These surface changes should be distinguished from deterioration within the material.

Suitable exterior coatings help reduce the effects of rain and sunlight, but no coating is permanent or maintenance-free. Products must suit the exposure conditions, be applied correctly and be renewed when necessary.

Preservative treatment and surface protection

Impregnation introduces suitable preservatives into wood. Depending on the product and method, it may protect against fungi and insects. Paints, varnishes and oils applied to the surface serve different purposes and are not the same as impregnation.

The intended use determines product selection. Indoor use, outdoor exposure, soil contact and water contact require different solutions. Treatments should follow product instructions and relevant technical requirements.

Regular inspection and maintenance

Maintenance aims to identify warning signs before damage becomes extensive. Roof and gutter leaks, water-trapping joints, areas near the ground and worn finishes should be checked regularly. The source of moisture or deterioration should be corrected before repair and protective treatment.

With proper design, suitable material selection and regular maintenance, timber can serve for many years. Protecting wood is principally about understanding its natural characteristics and providing appropriate conditions rather than trying to change them.

+90 532 789 08 83
+90 535 021 02 35