PAINTING AND FINISHING WOOD

HOME BLOG PAINTING AND FINISHING WOOD
PAINTING AND FINISHING WOOD

To choose the right surface coating, we first need to determine why the surface requires protection. Wood serves so many purposes that this choice is not always straightforward. For flooring, polyurethane-based materials resistant to mechanical impact and heavy wear should be selected. For external cladding, flexible, breathable exterior coatings resistant to sunlight and outdoor conditions are needed.

The second consideration is the desired appearance, the wood species and the available application methods. A common mistake in Türkiye is to select the wood first and decide on its appearance and colour afterwards. The correct approach is the reverse. If exterior timber will be painted white, a species with as little resin and as few knots as possible should be chosen.

White or pale paints can cause problems on resinous, knotty Scots pine and on species such as iroko that contain coloured extractives. Resin and extractives can seep through microporous, breathable exterior coatings and stain the facade over time. If fillers or similar materials are used beneath the paint to block this seepage, escaping resin may lift the filler and paint, producing familiar flaking and peeling. Resin flow increases with temperature: dark coatings heat the surface more and encourage more resin to emerge, but the staining is less visible on dark colours. Traditional knot-burning methods can do more harm than good to coating performance. Further information is provided in the surface-treatment section.

Unless there is a compelling reason, completely clear, colourless varnishes should not be applied to exterior timber. They cannot protect the wood surface against ultraviolet radiation. Some contain UV filters, but these additives do not last long enough for exterior timber. Such varnishes and polishes can help prevent colour changes in indoor furniture. Transparent exterior wood coatings do contain colour: their natural metal-oxide pigments retain their UV-filtering effect over time.

Surface coatings may be applied by brush, dipping or spray gun. Not every coating suits every application method. The working environment and the experience of the people applying the product must be considered. Spraying on a building site and brush-painting large panels should be avoided. The drying speed of the coating is another important consideration.

What is a breathable coating?

Breathable coatings create a film that resists liquid water while allowing water vapour to pass through. They may also be described as microporous coatings with high water-vapour permeability. Movement caused by rain or changing atmospheric humidity, or a minor impact, can create a small crack in an exterior finish and allow wood to become wet. It is essential for the life of both the coating and the timber that water beneath the finish can dry quickly. Prolonged wetting can cause paint to peel and wood to decay.

Breathable wood coatings may be opaque or translucent. Translucent versions are also coloured and contain a high proportion of natural metallic pigments, meaning that they resist fading. These coatings penetrate the wood well and are flexible enough to move with it.

Water-based or solvent-based?

The popularity of water-based paints has led to misconceptions, such as the assumption that water-based products last longer while solvent-based ones deteriorate quickly. This is incorrect: a solvent-based product may sometimes outlast a water-based one. There are also environmental misconceptions. Lower solvent content is certainly an advantage for people nearby during application. However, some water-based floor finishes may contain carcinogenic chemicals added to achieve the required hardness. Products should therefore be assessed individually rather than through broad assumptions. Modern formulations are so complex that the traditional synthetic-versus-cellulosic classification has also lost its usefulness.

Durability of exterior coatings

It is difficult to assign a service life to a coating, particularly outdoors. Its lifespan depends on application, wood species and, above all, climate. If a figure is required, three to seven years can be suggested. More important characteristics are resistance to flaking and ease of maintenance. Organisations such as TRADA in the United Kingdom test these coatings and provide information to consumers. Initial tests use weathering chambers that imitate rain, heat and sunlight, but the decisive assessment comes from real outdoor exposure tests.

It must be remembered that these coatings never replace preservative treatment. Many contain active ingredients against surface mould and blue-stain fungi, but mould and blue staining are not the same as decay.

+90 532 789 08 83
+90 535 021 02 35